Emerson Epsilon EP Drive 400518-01 Manual de instalación descargar pdf (Pagina 88)

Epsilon EP-P Drive and FM-3/4 Module Reference Manual

Total Binary Value = 3

Therefore, Selector.Selection3 would activate.

The Selector.Select lines can change without any action until the Selector.SelectorInitiate destination is activated.

Selector.Selection sources can be tied to any destination in the Assignments view. Figure 70 shows the four selection lines

being tied to Index 0 through Index 3 initiates. By doing this, we could initiate up to four indexes with only two select lines

and a selector initiate. This can help minimize the number of inputs required to initiate a large number of indexes or programs.

Input Lines View

The Input Lines View displays any functions that have been assigned to the drive or module hardware inputs. See Figure 71.

Note

No assignments can be made using the Input Lines View, assignments are only displayed in the Input Lines View.

Figure 71: Input Lines View for an FM-3/4 Module

The following two functions can be performed on the Input Lines view.

Name

You can assign a descriptive name to each input and make the setup easier to follow. The length of the text string is limited

to a maximum of 12 characters. Simply double click on the Name field of any input line to assign a name to it.

Debounce

You can program a “Debounce Time” to any input line, which means the motion profile will need to be steady for at least the

debounce time before it is recognized. This feature helps prevent false triggering in applications in noisy electrical

environments. At the end of the debounce time, the next action can occur.

Figure 72: Input Line Diagram

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 239 240

Sin comentarios

Emerson Epsilon EP Drive 400518-01 Manual de instalación Pagina 88