Emerson World Class 3000 Manual de instrucciones Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Instruction Manual
Appendix AX Rev. 2.1
February 1998
Rosemount Analytical Inc. A Division of Emerson Process Management Appendices A-7
World Class 3000
Table A-2. Fault Finding
SYMPTOM CHECK FAULT REMEDY
1. No response to
oxygen concentration
change when:
Heater is cold and
TC mV output is less
than setpoint.
Thermocouple continuity Thermocouple failure Replace thermocouple
or return probe to
Rosemount.
Heater cold resistance to
be 11 ohm - 14 ohm
Heater failure Replace heater or return
probe to Rosemount.
Triac O/P to heater Failure of electronics Check HPS and
electronics package.
Heater is hot and
T/C mV output is at
setpoint ±0.2 mV.
Recorder chart Recorder failure See Recorder Instruc-
tion Manual.
Cell mV input to electron-
ics and cell mV at probe
junction box
No cell mV at probe when
test gas applied
Replace cell or return
probe to Rosemount.
Probe cell mV OK but no
input to electronics
Check out cable
connection.
Cell mV satisfactory both
at probe junction box and
input to electronics -
failure of electronics
Check electronics
package.
2. System responds to
oxygen concentration
changes but does not
give correct indication.
Good response, with
incorrect indication.
Recorder or remote
indicator
Calibration error Recalibrate recorder or
indicator, reference
Recorder Instruction
Manual.
System calibration Calibration error Recalibrate system.
Probe mounting and
condition of duct
Air ingress into duct Stop air leaks or resite
probe.
Cell mV input to
electronics
Failure of electronics Check electronics
package.
3. Probe does not give
accurate indication of
applied test gas.
Test gas input port Blocked port Clean port.
Ceramic diffusion element Diffusion element cracked,
broken, or missing
Replace diffusion
element.
AX
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 157 158

Comentarios a estos manuales

Sin comentarios