Emerson FM-3 Manual de instalación descargar pdf (Pagina 156)

142

FM-3 Programming Module Reference Manual

Figure 63: Output Lines View

A name can also be given to each hardware output line. Figure 8 shows how to enter a name

for an individual output line.

Name – This 12-character string allows a descriptive name assignment to an output line. This

makes the configuration easier to follow.

Step 4: Setting Up Motion Parameters

Now that all of the assignments have been made, you next setup the jog, home, and index

definitions. To do this, it is necessary to expand the Motion group in the hierarchy window.

Jog Setup

The Jog views allow you to setup any jogs required by your application. Select either the Jog0

or Jog1 to enter the specific Jog parameters. Figure 11 shows Jog1 setup view (renamed Jog

Fast). Once in the individual jog views, the up and down arrows next to the Jog Number

parameter can be used to scroll between the jog views (see Figure 9). The following jog

parameters have been defined on this view:

Jog Name - Jog0 has been named Jog Slow and Jog1 named Jog Fast. This is a 12-character

string that allows you to give a descriptive name to a jog profile.

Jog Velocity – Is the target velocity for the Jog profile. If the Jog.Select0 destination is

inactive, the Jog0 velocity is the target velocity, if Jog.Select0 is active, then Jog1 velocity is

used.

Jog Acceleration – Is the average acceleration rate used when accelerating to the target

velocity.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 229 230

Sin comentarios

Emerson FM-3 Manual de instalación Pagina 156