Emerson X-web300 Manual de usuario descargar pdf (Pagina 44)

1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005

Pg.44/106

• Leds 1 / 2 are blinking: the parameter can not be changed.

• All the leds are off: the parameter ca not be seen in Pr1 level.

• Led 3 is on: the parameter can be seen in Pr1 level.

• Leds 1 / 2 are blinking and led 3 is on: the parameter can be showed and changed in Pr2, showed but not changed in Pr1.

• Leds 1 / 2 / 3 are blinking: the parameter can be showed and changed in Pr2 and in Pr21.

• In Pr2 level the user can not see and change any parameter of Pr3 level.

• The MENU key allows to exit from a family to reselect another without exit the Pr2 level.

• The MENU key allows to pass to Pr1 starting from a family label.

• To exit completely the programming push SET + UP.

11.7 ENTER THE PROGRAMMING LEVEL PR3

Enter the Pr3 “OEM level ”:

1. Push the SET + DOWN keys together for 3 seconds. The top display shows PAS while the bottom display shows Pr1 labels.

2. Push UP key for 2 seconds and the top display will show Pr2.

1. Push UP key again for 2 seconds and the top display will show Pr3

3. Push SET key and the top display shows a blinking 0, with UP or DOWN insert the Pr3 password. Push SET and, if the value

is correct, top display will show the first family of parameters “ALL”. Otherwise set the password again.

4. Select a parameter family with DOWN or UP keys.

5. Push SET to enter, the bottom display shows the first available parameter label while the top display shows its value.

The user can shows and modify all the paramters belonging to this family.

Parameter status, leds and bottom display in Pr3

• Leds 1 / 2 are blinking: the parameter can not be changed.

• All the leds are off: the parameter is available only in Pr3.

• Led 4 on: the parameter can be changed also in Pr2.

• Led 4 blinking: the parameter is visible also in Pr2 .

• Leds 3 / 4 on: the parameter is available in Pr2 and in Pr1.

• Leds 3 / 4 blinking: the parameter is visible in Pr1 and in Pr2.

• The MENU key allows to exit from a family to reselect another without exit the Pr2 level.

• The MENU key allows to pass to Pr1 starting from a family label.

• To exit completely the programming push SET + UP.

11.8 MOVE A PARAMETER LEVEL FROM PR2 TO PR1

Enter Pr2 programming level

Select the parameter and if the led # 3 is off: the parameter is available only in Pr2.

To show the parameter also in Pr1:

1. Keep pushed SET key;

2. Push 1 time the DOWN key and the led 3 should be on, the parameter is now available in Pr1.

To hide the parameter in Pr1:

1. Keep pushed SET key;

2. Push 1 time the DOWN key and the led 3 should be off, the parameter is now removed from Pr1.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 101 102

Comentarios a estos manuales

Vikiyrc 04 Jan 2024 | 11:56:12

urenrjrjkvnm

Evaufi 07 Jan 2024 | 14:53:46

Med

Emerson X-web300 Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emerson X-web300