Emerson X-web300 Manual de usuario descargar pdf (Pagina 14)

1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005

Pg.14/106

4.4 KEY FUNCTION

KEY ACTION FUNCTION

Push and release Show chiller set point SetC and heat pump SetH

Push once

In chiller or heat pump if the Energy saving or the Dynamic

setpoint are enabled it shows the real setpoint Setr, the led is

blinking.

Push for 3 seconds the release Change between chiller / heat pump

During the programming: push one time Select a parameter or confirm a value

Push once with probe label showed on the

bottom display

Change between the read-out of the circuit 1 and the circuit 2 and

viceversa

Push once Select the readings of the first circuit

Pushing once during the programming To change the parameter code or value

UP KEY

Push for 1 second during the programming

1 time shows the Pr2 programming level

2 time shows the Pr3 programming level

Push once Select the readings of the second circuit

TASTO DOWN

Pushing one time during the programming To change the parameter code or value

Push once

Turn the chiller on, if the unit is on led is on

The led is blinking if there is a power on delay or during the pump

down

Push once

Turn the heat pump on, if the unit is on led is on

The led is blinking if there is a power on delay or during the pump

down

Push once enter the function Menu

Push for 3 seconds To set RTC parameters (if the RTC is inside)

Pushing once during the programming To exit from a group of parameter

Push once

Start the heating recovery of the chiller unit, with recovery active

the led is on

Push once

Start the free cooling of chiller unit, with free cooling active the led

is on

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 101 102

Comentarios a estos manuales

Vikiyrc 04 Jan 2024 | 11:56:12

urenrjrjkvnm

Evaufi 07 Jan 2024 | 14:53:46

Med

Emerson X-web300 Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emerson X-web300