Emerson NetSure DCS 48375 Manual de instrucciones Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
UM584622100 Installation and User Instructions
Issue AC, July 3, 2012 Spec. Nos. 584622100, 584622200, 584622300, 584622400 (Model DCS48375)
Page 32 Chapter 8. Troubleshooting and Repair
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Replacing a TPS/TLS Fuse
Note: Refer to Figure 2-5 as this procedure is performed.
Procedure
1) Open the shelf’s front door.
2) Remove the fuse carrier from the mounted fuseholder body by pulling it straight
out.
3) Remove the open fuse from the fuse carrier and replace it with the same type
and rating, or equivalent.
4) Replace the alarm fuse located in the front of the fuse carrier with the same type
and rating, or equivalent. Ensure that a plastic safety cover is installed on the
alarm fuse.
5) Push the fuse carrier securely back into the mounted fuseholder body. Note that
a polarizing key on the bottom of the carrier prevents the carrier from being
inserted upside down.
6) Verify there are no alarms active.
7) Close the shelf’s front door.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Comentarios a estos manuales

Sin comentarios