Emerson Fisher 4320 Manual de instrucciones descargar pdf (Pagina 55)

Instruction Manual

D103621X012

4320 Position Monitor

April 2014

Diagnostic Features

The 4320 includes the following diagnostics which can be accessed using the Field Communicator, AMS Wireless

Configurator or AMS Device Manager.

D Cycle counter is shipped from factory with a high value. This alert is used with valves that have service

recommendations based on number of actuation cycles. Reset Accumulated Count is used to clear the accumulated

count value. This is typically done when maintenance to valve and/or actuator has been performed. Refer to page

43 for additional information on Cycle Counter.

Refer to figure 25 and 26 for the Field Communicator menu trees.

In AMS Wireless Configurator or AMS Device Manager go to Configure, Alert Set‐up. Enter the Cycle Trip Point value on

the Cycle Counter tab to set the cycle counter. When the value turns yellow (indicating that a change has been made)

select Apply. Refer to figure 29.

To clear the accumulated cycle value select Reset Accumulated Count.

D Power status indicates the status of the power module voltage.

Refer to figure 25 and 26 for the Field Communicator menu trees.

In AMS Wireless Configurator or AMS Device Manager go to Service Tools, Variables, then select the Device tab to view

the power module voltage status. Refer to figure 30.

Figure 29. Resetting the Accumulated Count in AMS

Wireless Configurator and AMS Device Manager

ALERT SETUP

RESET

ACCUMULATED

COUNT

ENTER CYCLE TRIP

POINT

CONFIGURE

APPLY

Figure 30. Power Status in AMS Wireless

Configurator and AMS Device Manager

DEVICE TAB

SERVICE TOOLS

VARIABLES

POWER MODULE

VOLTAGE

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Sin comentarios

Emerson Fisher 4320 Manual de instrucciones Pagina 55