Emerson Fisher 4320 Manual de instrucciones descargar pdf (Pagina 12)

Instruction Manual

D103621X012

4320 Position Monitor

April 2014

Figure 6. Installing Unit Supplied with External Power Option

X1028

HART

TERMINALS

J2 GND

TERMINAL

J1 PWR

TERMINAL

COVER SCREWS

CABLE GLAND

(USER-SUPPLIED)

GROUND TERMINAL

POWER

WIRES

WIRING

CONNECTIONS

ELECTRICAL CONNECTION SCREWS (4 TOTAL)

MECHANICAL MOUNTING SCREWS (4 TOTAL)

Network Setup

The 4320 should have wireless network parameters configured prior to becoming part of a wireless network. All

WirelessHART devices within a network have two network parameters that are the same; the Network ID and the Join

Key.

The 4320 is shipped with a pre‐configured Network ID of 1229 and a Join Key which is set to all zeros. Prior to being

installed these should be set to match the other devices on the network. These configuration changes can be made

using a 475 or 375 Field Communicator, AMS Wireless Configurator, or AMS Device Manager 10.5 and above.

Note

When the 1420 or other WirelessHART gateway is configured in an advanced security mode each device is required to have an

individual join key.

Using the Field Communicator

1. Verify the Field Communicator has a device description (DD) loaded for the 4320 Device Revision 4 (DD Revision 1

or later).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Sin comentarios

Emerson Fisher 4320 Manual de instrucciones Pagina 12