Emerson 3051S Especificaciones Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Reference Manual
00809-0100-4801, Rev FA
October 2010
Rosemount 3051S Series
2-20
Quick Connect Wiring As standard, the 3051S Quick Connect arrives properly assembled to the
SuperModule and is ready for installation. Cordsets and Field Wireable
Connectors (in shaded area) are sold separately.
Figure 2-11. Rosemount 3051S
Quick Connect Exploded View
IMPORTANT
If Quick Connect is ordered as a 300S spare housing or is removed from the
SuperModule, follow the instructions below for proper assembly prior to field
wiring.
1. Place the Quick Connect onto the SuperModule. To ensure proper pin
alignment, remove coupling nut prior to installing quick connect onto
SuperModule.
2. Place coupling nut over quick connect and wrench tighten to a maximum
of 300 in-lb. (34 N-m).
3. Tighten the set screw using a
3
/32-in hex wrench.
4. Install Cordset/ Field Wireable Connectors onto the Quick Connect.
Do not over tighten.
Figure 2-12. Quick Connect
Housing Pin-Out
Straight Field
Wireable
Connector
(1)(3)
Right Angle Field Wireable Connector
(2)(3)
Cordset / Field Wireable Coupling Nut
Cordset
(4)
Quick Connect Housing
Quick Connect Coupling Nut
(1) Order part number 03151-9063-0001.
(2) Order part number 03151-9063-0002.
(3) Field wiring supplied by customer.
(4) Supplied by cordset vendor.
For other wiring details, refer
to pin-out drawing and the
cordset manufacturer’s
installation instructions.
“+”
“–”
Ground
No Connection
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 239 240

Comentarios a estos manuales

Sin comentarios