Emerson Rosemount 2051 Wireless Pressure Transmitters Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 154
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
19
Reference Manual
00809-0100-4102, Rev AA
Section 2: Configuration
May 2013
Configuration
1. Select Manual Setup and click on the HART tab.
2. Assign Primary, secondary, tertiary and quaternary variables under Variable Mapping.
3. Click Send.
4. Carefully read the warning and click Yes if it is safe to apply the changes.
2.6.3 Set range points
The Range Values command sets the lower and upper range values used for the percent of range
measurement.
Note
Transmitters are shipped from Rosemount Inc. fully calibrated per request or by the factory
default of full scale (span = upper range limit).
1. From the Home screen, select 2: Configure
2. Select 1: Guided Setup
3. Select 1: Basic Setup
4. Select 5: Range Values
From the HOME screen, enter the fast key sequence
Fast Keys
2, 1, 1, 5
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 153 154

Comentarios a estos manuales

Sin comentarios