Emerson FM-3 Guía de usuario descargar pdf (Pagina 166)

147

Diagnostics and Troubleshooting

Diagnostic Display

The diagnostic display on the front of the drive shows drive status and fault codes. When a

fault condition occurs, the drive will display the fault code, overriding the status code. The

decimal point is “On” when the drive is enabled and the Stop input is not active. This indicates

that the drive is ready to run and will respond to motion commands. Commands will not cause

motion unless the decimal point is “On”.

Display Indication Status Description

Brake Engaged (Output "Off")

Motor brake is mechanically engaged. This character

will only appear if the Brake output function is

assigned to an output line.

See Brake Operation section for detailed description of

Brake Output function.

Disabled Power Stage is disabled.

Position Pulse mode operation.

Velocity Velocity mode operation.

Torque Torque mode operation.

Summation Summation mode operation.

RMS Foldback Motor torque is limited to 80 percent.

Stall Foldback

(EN drive only)

Drive output current is limited to 80 percent of drive

stall current.

Epsilon Eb and EN Drives Reference Manual

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 262 263

Sin comentarios

Emerson FM-3 Guía de usuario Pagina 166