
Product Data Sheet
00813-0100-4530, Rev AA
Catalog 2008 - 2009
Rosemount 5300 Series
Level-4
System Integration
INPUTS / OUTPUTS
The 5300 Series transmitter uses the same two wires
for both power supply (see page Level-20) and
communication.
Measurement data is transmitted as an analog
4-20 mA signal with a superimposed digital HART
®
signal or F
OUNDATION™ fieldbus signal.
The HART
®
signal can be used in a multidrop mode.
By sending the digital HART
®
signal to the optional
HART
®
Tri-loop, it is possible to have up to three
additional 4-20 mA analog signals.
See the Rosemount 333 HART
®
Tri-loop Product
Data Sheet (document number 00813-0100-4754)
for additional information.
5300 Series
transmitter
Display
Tri-loop
3 x 4-20 mA
Control
System
HART
®
Modem
4-20 mA / HART
®
375 Field
Communicator
HART
®
Host / DCS system (e.g. DeltaV
®
)
Maintenance
H2 - High Speed Field Bus
H1 - Low Speed Field Bus
FOUNDATION™fieldbus
375 Field
Communicator
Rosemount 5301
Note:
Intrinsically safe
installations may
allow fewer devices
per I.S. barrier due to
current limitations.
6234 ft (1900 m) max
(depending upon cable
characteristics)
Rosemount 5401
Rosemount 5601
PC with Rosemount
RadarMaster
(See “Configuration” on page 5)
Fieldbus
Modem
Display
(option)
PC with Rosemount
RadarMaster
(See “Configuration” on page 5)
Comentarios a estos manuales