Emerson I/O MODULE IPMC7126E Manual de usuario descargar pdf (Pagina 2)

Front page

Interior page

MVME5500 Block Diagram

Backwards Compatibility

The MVME5500 continues the direction that Emerson

started with the MVME5100 series of providing a

migration path from Emerson’s embedded controllers

and single-board computers (SBCs) to a single

platform. This migration path enables OEMs to

support varying I/O requirements with the same base

platform, simplifying part number maintenance,

technical expertise requirements and sparing.

The MVME5500 series offers customers a migration

path from the MVME2300, MVME2400, MVME2600,

MVME2700 and MVME5100 boards to allow them to

take advantage of features such as the MPC7455

processor, Gigabit Ethernet and dual independent

33/66 MHz PMC sites.

IPMC MODULES

The IPMC761 and IPMC712 are optional add-on PMC

modules that provide backward compatibility with

previous generation Emerson products (such as

MVME2600, MVME2700 and MVME5100 in IPMC mode)

using the MVME761 or MVME712M transition module.

IPMC modules provide rear I/O support for the following:

COM2

Planar

EIA232

UART

COM1

FP I/O

– A32/D64-bit

A32/D64-bit, 133 MHz

– A32/D64-bit

66 MHz PCI Local Bus

– A32/D64-bit

33 MHz PCI Local Bus

Port 2

10/100BaseTX

FP I/O

Port 1

10/100/1000

BaseTX

FP I/O

PMC

FP I/O

PMC

FP I/O

EIA232

P2 P1

Battery

Universe II

UART

L3 Cache

2MB

Ethernet

10/100BaseTX

PHY

Gigabit

Ethernet

Controller

PMC

Slot 2

NVRAM

RTC

PCI

Bridge

Flash

32MB

(soldered)

8MB

(soldered)

MPC7457

1 GHz

PMCspan

Connector

SDRRAM

133 MHz

512 MB

PCI Bridge &

Memory Controller

Discovery

IPMC

Slot 1

One single-ended Ultra Wide SCSI port n

One parallel port n

Four serial ports (two or three async and one or two n

sync/async, depending on module)

With an IPMC installed, one PMC slot is still available,

providing support for OEM product customization.

P2 I/O MODES

The MVME5500 series supports two, jumper-congurable

P2 I/O modes: PMC mode and IPMC mode. PMC mode

is backward compatible with the MVME2300/

MVME2400 and MVME5100 in PMC mode. In PMC

mode, 64 pins from PMC slot 1 and 46 pins from PMC

slot 2 are available on P2 for PMC rear I/O. In IPMC

mode, the MVME5500 series supports legacy

MVME761 or MVME712M I/O modules (with limited

PMC I/O) when an IPMC761 or IPMC712 PMC card is

populated in PMC slot 1. In this conguration, PMC

slot 2 contains some signals that are reserved for

extended SCSI.

1 2 3 4 5 6 7

Comentarios a estos manuales

Sin comentarios

Emerson I/O MODULE IPMC7126E Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emerson I/O MODULE IPMC7126E