Emerson FM-3 Guía para resolver problemas descargar pdf (Pagina 53)

Next, you will be presented with the dialing properties dialog box. This program assumes that you are

trying to connect to another computer using a modem. However, if you expand the “Connect Using” drop

down box, you will see not only your modem (if you have one installed) but also all of the available Com

ports. Select the Com port you would like to test from this list.

Figure 5

Next, configure the properties for the Com port you have selected. Ensure that your configuration matches

the picture in Figure 6 exactly.

Figure 6

Once the Port Settings are defined, click on the OK button and HyperTerminal will open the Com port

automatically. You can determine if the program is active by referring to Figure 7. HyperTerminal will

show “Connected” in the lower left corner of the Status bar.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Sin comentarios

Emerson FM-3 Guía para resolver problemas Pagina 53