Emerson DataMate 3000 Series Especificaciones descargar pdf (Pagina 4)

You Need To Start With The Right Kind Of Cooling

Why Comfort Air Conditioning

Should Make You Uncomfortable

Standard building air conditioning is designed for one

thing: to keep people comfortable. In most cases, this

is done 8-12 hours each day, five days a week and only

during the warmest months. These units are simply not

built to handle the 24 hour-a-day operation associated

with computer rooms and communications facilities.

The Protection Never Stops

Mission-critical cooling systems are designed to run

the same hours as your network — continuously, year

in and year out, around the clock. These systems are

specifically designed to maintain both temperature

and humidity levels to equipment manufacturers’

specifications, which are several times more stringent

than those designed for the human body.

Some operations may be tempted to utilize standard comfort cooling systems to save money or to avoid using additional floorspace

within their facility. But while these moves may provide some benefits in the short term — they must be balanced against the

cost of potential downtime and equipment damage caused by serious overheating, as well as the risk of financial loss.

Removing Heat Without Removing

The Humidity

The biggest problem with ordinary air conditioning

systems is they are designed for the comfort of people —

not the protection of computer-based electronic systems.

Unlike people, computers generate dry (also called

sensible) heat, but not humidity.

With a large percentage of their total capacity devoted

to the removal of moisture, comfort systems can lower

room humidity far below acceptable standards for

electronic equipment — and they have no provisions

for adding moisture. To correct this situation, precision

air conditioning systems typically have a high ratio of

sensible-to-total cooling capacity to remove heat from

the air. This allows for much lower operating costs since

the type of cooling is matched to the load. These units

also use integrated humidification systems to provide

the necessary level of moisture control.

Using rigid, overhead ducts

provides insufficient air volume

(350-400 CFM/Ton) which

results in hot spots. They are

also difficult to relocate.

Minimal air filtration

is typically provided

with comfort systems.

Using separate humidification

systems, not controlled by

the cooling system, can

waste energy and reduce the

stability of the environment.

Comfort systems can over-dry

room air because of their

lower Sensible Heat Ratio.

They typically do not provide

integral humidity control.

Comfort Air

181394_broch.indd 5 2/23/10 11:33:20 PM

1 2 3 4 5 6 7 8 9 ... 31 32

Comentarios a estos manuales

Sin comentarios

Emerson DataMate 3000 Series Especificaciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Emerson DataMate 3000 Series