Emerson Fisher 1061 Manual de instalación descargar pdf (Pagina 7)

Instruction Manual

D100324X012

1061 F & G Actuator

October 2012

D For all sizes: Hold the lever in position, and secure the assembly with the cap screw (key 29).

14. Rotate the lever until the cap screw hole is aligned with the rod end bearing (key 12). You may need to adjust the

turnbuckle to make this alignment.

15. For all actuator sizes, apply thread locking sealant (high strength) (key 83) to the cap screw (key 13) threads.

Table 3. Recommended Bolting Torques

KEY NUMBER

ACTUATOR SIZE

30 40 & 60 68 80 & 100 130

NSm

3 102 102 102 102 123

6 14 14 14 --- 91

9 61 136 248 --- 1763

11 34 102 102 475 542

13 80 271 271 271 1763

22 23 68 68 169 162

24 34 81 81 271 257

29 81 271 271 271 970

35 34 81 81 271 257

41 14 14 14 14 14

71 102 163 253 475 542

86 --- --- --- 861 ---

KEY NUMBER lbfSft

3 75 75 75 75 75

6 10 10 10 --- 67

9 45 100 257 --- 1300

11 25 75 75 350 400

13 60 200 200 200 1300

22 17 50 50 125 120

24 25 60 60 200 190

29 60 200 200 200 715

35 25 60 60 200 190

41 10 10 10 10 10

71 75 120 260 350 400

86 --- --- --- 635 ---

WARNING

Refer to table 3 for bolt torque requirements. Exceeding any torque requirements could damage actuator parts and impair

safe operation. Refer to the Warning at the beginning of the Installation section in this manual.

Note

If the cap screw key number is shown in table 3, torque t he cap screws to the value shown in the table for final assembly.

16. Connect the lever to the rod end bearing with the cap screw and hex nut (keys 13 and 14) for size 30, 40, 60, and

68 actuators; with the cap screw, washer, and locknut (keys 13, 84, and 85) for size 80 and 100 actuators; or with

the cap screw and hex nut (keys 13 and 85) for size 130. Torque cap screw and hex nut to the value listed in table 3.

17. Note the valve disc or ball position and direction of rotation.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comentarios a estos manuales

Sin comentarios

Emerson Fisher 1061 Manual de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Otros dispositivos de entrada Emerson Fisher 1061