Emerson USB Fieldbus Interface Manual de usuario descargar pdf (Pagina 20)

DecommissionFigure 4-4:

4. Determine if the fieldbus device was commissioned on another host,

then select Yes or No.

• If you choose Yes, the decommissioning proceeds.

• If you choose No, you cannot decommission the device.

Decommissioning is not allowed for devices commissioned on

another host.

5. Repeat steps 2 through 4 for each device you want to decommission.

4.5 Change the device class

A connected fieldbus device can be assigned as a Link Master (LM) or as a

basic device. A Link Master contains the LAS functionality that controls

communications on a fieldbus link or segment.

1. Launch the Fieldbus Interface Configuration utility.

2. Under the USB Fieldbus Interface icon, select the fieldbus device you

want to configure.

Note

A connected fieldbus device or segment should be powered by an external power source or be

provided power by the Fieldbus Interface Configuration utility for it to be detected.

3. From the Device Class section, click Read to identify if the fieldbus device

is a Link Master or a basic device.

User's Manual May 2014

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 58 59

Sin comentarios

Emerson USB Fieldbus Interface Manual de usuario Pagina 20