Emerson Smart Wireless THUM Adapter Manual de usuario descargar pdf (Pagina 16)

Kurz Instruments Inc. Document 360209-AU

Document Title: MFT B-Series WirelessHART Interface Guide

Revision. A, Release Date: 08.17.2010 Page 16 of 21

The Gateway should be powered with a 24Vdc power supply with at least 500 mA. Use the

following procedure to log in to the Gateway to configure it.

1. Open an internet browser (typically Microsoft Internet Explorer)

2. Enter 192.168.1.10 in the address bar

3. Acknowledge the security to proceed

4. Enter admin for User Name

5. Enter default for the Password

The web browser will be directed to the Gateway’s default home page. There is a navigation

menu located on the left hand side with four main areas as follows:

• Diagnostics – View status of communications, client server parameters, and more

• Monitor – Screens created by the user to view data from field devices

• Explorer – Basic view of values from field devices

• Setup – Configure the Gateway for operations, security, and host system integration

The Setup menu is where the security keys are configured that allow the wireless HART device

(i.e., MFTB) to communicate with the Smart Wireless Gateway and ultimately to the DCS or

HOST Information System. This menu is also where the Network Settings for the Gateway is

configured. Access Setup > Network > Settings as shown below:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Sin comentarios

Emerson Smart Wireless THUM Adapter Manual de usuario Pagina 16