Emerson iPro SERIES Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
________________________________________________________________________________________________________
1592025400 – Vers. 1.0 - 53 -
To check how many breakpoints there are in your application and if you need to remove
them, click the icon :
If the step by step set-up is completed, save and compile the application.
To test the system there are two ways:
with SIMULATION .
with DEBUG TARGET ; in this case the following operations are necessary:
o download the application with the breakpoints in the target
o disable the Watchdog (see the “Website for iPRO” chapter)
BE AWARE: when the debug test has been completed and you are in the DEBUG
TARGET, to enable the Watchdog is necessary to reboot the Target (iPRO).
When you will launch the debug, the ISaGRAF workbench will ask you the following
information; confirm with “Yes” or “Yes to all”.
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 140 141

Comentarios a estos manuales

Sin comentarios