
System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB) Issue BF, February 21, 2014
Page 37 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Toggle-Handle Bullet Nose Type Circuit Breakers
for Use in Lists 115 and 125
Ampere
Rating
Number of Poles
(and mounting
positions
required)
P/N
Lugs
Electrical
Trip
1
(White
Handle)
Electrical/
Mechanical
Trip
2
(Black Handle)
Up to 2 AWG lead sizes, use
lugs in Table 7 (1/4” clearance
holes on 5/8” centers.
From 1/0 to 350 kcmil lead
sizes, use lugs in Table 7
(Special Crimp Lug).
100 1 102286 101610
125 2 516991 516838
Use lugs in Table 7
(Special Crimp Lug).
150
2 516993 516839
175
(see
below)
2 144883 144884
200
(see Caution below)
2 121831 121832
225
(see
below)
3 144885 144886
Use lugs in Table 7 (Special
Crimp Lug) plus special lug
adapter P/N 545346 or lug
adapters listed in Table 7.
3 121835 121836
See Table 8 for recommended load distribution wire sizes.
Circuit Breaker Alarm Operation:
1
Provides an alarm during an electrical trip condition only.
2
Provides an alarm during an electrical or manual trip condition.
Caution: An overcurrent protective device with a rating of 150 amperes or greater SHALL HAVE an
empty mounting position between it and any other overcurrent protective device.
Table 5
Toggle-Handle Bullet Nose Type Circuit Breakers
for Use in Lists 115 and 125
Comentarios a estos manuales