Emerson 1301 Series Pressure Reducing Regulators Manual de instrucciones descargar pdf

Types 1301F and 1301G

D100341X012

Instruction Manual

Form 1111

December 2013

www.fisherregulators.com

WARNING

Failure to follow these instructions or

to properly install and maintain this

equipment could result in an explosion,

 re and/or chemical contamination

causing property damage and personal

injury or death.

Fisher

regulators must be installed,

operated, and maintained in accordance

with federal, state and local codes, rules

and regulations, and Fisher instructions.

If the regulator vents gas or a leak

develops in the system, service to the unit

may be required. Failure to correct trouble

could result in a hazardous condition.

Installation, operation, and maintenance

procedures performed by unquali ed

personnel may result in improper

adjustment and unsafe operation. Either

condition may result in equipment

damage or personal injury. Use quali ed

personnel when installing, operating,

and maintaining the 1301 Series high-

pressure regulator.

Introduction

Scope of the Manual

This Instruction Manual provides instructions for the

installation, adjustment, maintenance, and parts ordering

of the Types 1301F and 1301G high-pressure regulators.

Product Description

Types 1301F and 1301G regulators are direct-operated,

high-pressure regulators, which can be used where

high-pressure gas must be reduced for use as pilot

1301 Series High-Pressure Regulators

supply pressure in pilot-operated regulators or as

loading pressure in pressure-loaded regulators.

Types 1301F and 1301G regulators can also be used

in many other applications due to their rugged design

as high-pressure reducing regulators for various  uids

such as air, gas, water, and other liquids.

The Type 1301F can handle outlet pressures from

10 to 225 psig / 0.69 to 15.5 bar in three ranges and

the Type 1301G can handle outlet pressures from

200 to 500 psig / 13.8 to 34.5 bar in one range.

Figure 1. Type 1301F High-Pressure Regulator

P1025

1 2 3 4 5 6 7 8

Types 1301F and 1301G 1

Indice de contenidos

Pagina 1 - Types 1301F and 1301G

Types 1301F and 1301GD100341X012Instruction ManualForm 1111December 2013www.fisherregulators.com!WARNINGFailure to follow these instructions or to pro

Pagina 2

Types 1301F and 1301G2Available Congurations Type 1301F: Direct-operated, high-pressure reducing regulator for inlet pressures to 6000 psig / 414 bar

Pagina 3

Types 1301F and 1301G3Principle of OperationThe 1301 Series regulators are direct-operated. Downstream pressure is registered internally through the b

Pagina 4

Types 1301F and 1301G4Installation!WARNINGOverpressuring a regulator or associated equipment may cause leakage, part damage, or personal injury due t

Pagina 5

Types 1301F and 1301G5MaintenanceRegulator parts are subject to normal wear and must be inspected and replaced as necessary. The frequency of inspect

Pagina 6

Types 1301F and 1301G6CD3923_FFigure 3. Type 1301F High-Pressure Regulator AssemblyFigure 4. Type 1301G High-Pressure Regulator Assembly152111916113

Pagina 7

Types 1301F and 1301G7Parts OrderingWhen corresponding with your local Sales Ofce about this regulator, include the type number and all other pertine

Pagina 8