Emerson Micro Motion F-Series Sensor Manual de instalación descargar pdf (Pagina 16)

14 Sensor Installation: F-Series

Mounting the Sensor

Mounting the electronics of high-temperature and extreme high-temperature sensors

High-temperature and extreme high-temperature F-Series sensors come with a 32″ (812 mm) pre-installed

flexible conduit. This conduit is required for agency approval.

A factory-supplied Model 1700/2700 transmitter, core processor, or junction box is connected to the end of

the flexible conduit. Mount the electronics to a wall or instrument pole using the supplied bracket (Figure 10).

Figure 10 Electronics mounting for high-temperature F-Series sensors

Mounting

bracket

(wall mount)

Use 4 × 5/16″ (8 mm)

bolts to secure the

bracket to a wall

Slide the electronics into the

bracket groove.

Mounting

bracket

(instrument pole)

Use 2 × 5/16″ (8 mm)

U-bolts to secure the

bracket to an

instrument pole

Secure the electronics to the

bracket with the 4 #10 screws.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Sin comentarios

Emerson Micro Motion F-Series Sensor Manual de instalación Pagina 16