Emerson SS-100 Manual de usuario descargar pdf (Pagina 10)

4 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010

3Configuring the

SS-100

1. IMPORTANT: Download the latest version of

EZWebCon from the Lantronix Web site

www.lantronix.com

2. Connect the SS-100 to the LAN and power up the

unit.

3. Open EZWebCon on your computer (which must

also be connected to the LAN) and click the bin-

oculars icon (outlined in red) to find the allocated

IP address of the SS-100:

4. Choose the correct device on the Browse Net-

work screen and then click Ok:

5. Verify that the firmware version number in the

"Firmware" column is "3.6/9". If the firmware

version shows any other number than "3.6/9," the

SS-100 is the wrong version; contact Technical

Service for instructions on upgrading.

If the Firmware version is correct, proceed to

step 6.

6. Highlight the device and select Action>Manage

from the drop-down menu to open the Home

screen:

7. When any of the links along the left-hand side of

the screen are clicked the first time, you are

prompted to the Password screen: enter the pass-

Device Configurator (Search Tool Outlined)

NOTE: A search will locate all SS-100s on the

network. Use the MAC address located on the

back of the SS-100 to find the correct SS-100

in the list.

Choose and Highlight the Device

Action Menu Displayed

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Emerson SS-100 Manual de usuario Pagina 10