Emerson 15-90kW Guía de usuario descargar pdf (Pagina 21)

Enable Communication Protocols

17 Liebert

IntelliSlot

™

Unity

™

Card

Figure 11 SNMP settings

Configure SNMP Settings

SNMPv3 Users or SNMPv1/v2c Trap and Access settings must be made before SNMP access or

notifications can occur. The Liebert IntelliSlot Unity card permits up to 20 SNMPv3 Users, up to 20

SNMPv1 Trap targets, and up to 20 SNMPv1/v2c Access addresses.

The required changes vary according to the type of SNMP protocol used. For SNMPv1, trap settings

must be made. SNMPv2c must have Access Settings made. SMPv3 users must have settings

configured. SNMPv1 trap settings are separate from the access settings for SNMPv1/v2c.

Configure SNMPv3 Settings

The settings must be made for each user who will receive notifications.

1. Select Unity Tab > Protocols > SNMP > SNMPv3 Users Setting (20) > SNMPv3 Users Setting (1).

2. Click on Edit and enter a User name and password if required.

3. Enter the information and set the permissions appropriate to the user. Refer to Figure 12 for the

information required.

4. Click Save to confirm the changes or click on Cancel to discard them.

5. Repeat Steps 1 through 4 for any additional users.

6. Restart the card to activate the changes.

a. Select the Unity Tab > Support.

b. Enable the commands.

c. Click on Restart.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Sin comentarios

Emerson 15-90kW Guía de usuario Pagina 21