Emerson SiteLink-12E Manual de usuario

MonitoringFor Business-Critical Continuity™Liebert ®SiteLink-E™ Installation Manual - Liebert SiteLink-2E, Liebert SiteLink-4E and Liebert SiteLink-12

Connect Input Power Wiring63.2 Connect Input Power—AC or DCLiebert SiteLink-E modules may be powered with either alternating current or direct current

Communication and Control Wiring74.0 COMMUNICATION AND CONTROL WIRINGNOTICECommunication wiring must be performed in accordance with industry standard

Communication and Control Wiring84.1.1 Wiring IGM Ports 1. Connect the IGM wiring to the SiteLink-E IGM ports, using the labels above the ports as a g

Communication and Control Wiring94.2 RS-485 and ARC156 Wiring ConsiderationsAn RS-485 network is intended to be configured as a linear bus with daisy-

Communication and Control Wiring10Figure 10 Liebert SiteLink-E modules in ARCnet network4.4 Wiring Port S1Port S1 on the Liebert SiteLink-E accommodat

Communication and Control Wiring114.4.2 Wiring Port S1 for RS-485—Two-WireFor connecting the Liebert SiteLink-E Port S1 to a BMS that uses two-wire RS

Communication and Control Wiring124.4.3 Wiring Port S1 for RS-232When connecting the Liebert SiteLink-E Port S1 to a third-party device that uses RS-2

Specifications135.0 SPECIFICATIONSTable 1 SpecificationsPHYSICALModule Dimensions, W x H x D, in. (mm) 11-1/4 x 7-1/2 x 1-1/4 (286 x 191 x 32)Enclosur

Specifications14The Liebert SiteLink-E communicates using BACnet and/or third-party protocols, and can connect to a variety of port types at multiple

15APPENDIX A-COMMUNICATION PROTOCOL AND WIRING CONSIDERATIONSA.1 Differences Between RS-485 and RS-422Third-party manufacturers sometimes specify a de

16A.3 BiasData collisions occur when two devices enable their transmitters at the same time; these are likely to occur on RS-485/RS-422 networks. A ma

17Notes

18

Ensuring The High Availability0f Mission-Critical Data And Applications.Emerson Network Power, the global leader in enabling business-criticalcontinui

iTABLE OF CONTENTS1.0 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.0 I

iiFIGURESFigure 1 Liebert SiteLink-E layout—power and communication connections, ports and switches . . . . . . . 1Figure 2 Module dimensions, witho

Product Overview11.0 PRODUCT OVERVIEWThe Liebert SiteLink-E® interface module is a BACnet router that provides the communications link between Liebert

Installing the Liebert SiteLink-E Module22.0 INSTALLING THE LIEBERT SITELINK-E MODULEThe Liebert SiteLink-E module comes in an enclosure for mounting

Installing the Liebert SiteLink-E Module3Figure 3 Enclosure dimensions—overallFigure 4 Enclosure dimensions—Wall mount14.25"(362mm)12"(304.8

Installing the Liebert SiteLink-E Module4Figure 5 Enclosure dimensions—Floor mount16"(406.4mm)9"(228.6mm)0.88"(22.2mm)4.05"(102.8m

Connect Input Power Wiring53.0 CONNECT INPUT POWER WIRING3.1 Power WiringThe Liebert SiteLink-E module is a Class 2 device (less than 30VAC, 0.4A). Ta